Produse pentru 0 x pert pro pol (10)

Persil Expert, Washing Powder For White Fabrics, 300 G

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

PROFHILO® h+L is a stabilized hyaluronic acid (HA) based product intended for skin remodeling and treating skin laxity, not just for filling lines and wrinkles. PROFHILO® h+L is to be used in areas affected by skin laxity such as malar and submalar areas of the face. PROFHILO® h+L nourishes the dermal cells and restores skin's firmness. PROFHILO® h+L also improves tissue quality significantly, even in challenging areas, and can be complementary to other aesthetic treatments and dermal filler procedures. SKU:PFLO-0001 Brand:Profhilo Concentration:HA concentration 64mg/ml Indication:Improves tone Improves elasticity of the skin Treatment of skin laxity The Pack Includes:1 x 2ml Syringe 2 x 29G Needles Results' Duration:Results are instant from the first treatment. In general, results will last from 6 to 9 months Articles:Biostimulators vs. Dermal Fillers: What Medical Achieve Radiant Skin with Skin Booster Treatment Manufacturer:IBSA Derma

Le kit contient un chargeur micro usb, une sky batterie e510 batterie 380 mah. Référence:HB0437

Vielseitig einsetzbarer Feinspachtel, z.B. als Holzspachtel, Füllspachtel, Autospachtelmasse oder Reparaturspachtelmasse. Die 2K-Spachtelmasse haftet gut, lässt sich problemlos auch in dicken Schichten auftragen und trocknet schnell. Kleinere Unebenheiten und Vertiefungen lassen sich damit bestens ausfüllen und optimal bearbeiten. Anwendungsbereich: Autoreparatur, Schreinerei, Möbelindustrie, Maler- und Anstreicharbeiten Produkteigenschaften: Elastischer 2K-Feinspachtel auf Polyesterbasis. Leicht ziehbar, gut füllend, fein, leicht schleifbar. Bindemittelbasis: Ungesättigte Polyesterharze Glanzgrad: -- Trocknung: (23 ° C 60 % rel. Luftfeuchtigkeit) überlackierbar nach 15 - 20 Minuten Ergiebigkeit/Verbrauch: -- Auftragsart: -- Farbton: Stammmaterial: Weiß; Härter: Weiß Verwendung: außen , innen

PTW Blitz 400 - 2 Komponenten PU-Schaum ist formstabil, schnellhärtend und praxisbewährt. Härtet unabhängig von Luftfeuchtigkeit schnell aus. Expandiert oder schrumpft nicht nach. Große Klebkraft. Kann nach 30 Minuten geschnitten werden. Ergiebigkeit ca. 12 l (freigeschäumt bei 23 C). PTW Blitz 400 - 2 Komponenten PUSchaum verfügt über ausgezeichnete Dämm- und Schallschutzeigenschaften.

Der schnelle, genaue und einfache Urease-Test für Helicobacter pylori Schnelle Testresultate (erste Ablesung nach nur 5 Minuten) Die Farbänderung zeigt den Grad der Infektion an Günstiger Preis, einfache Handhabung Hohe Nachweisempfindlichkeit und Spezifität für Helicobacter pylori Keine Kühllagerung notwendig Erprobte Zuverlässigkeit Bezeichnung: Pronto Dry Inhalt/VE: 10 Productdetails: Urease-Test zur Diagnose von Helicobacter Pylori, 10er Packung Artikelnummer: 1121/10

Grâce à sa teneur très élevée en Polarlite, il garantit 4 effets nanotech extraordinaires : « Polish », pour une brillance à long terme ; « Essuie-glace Liquide », pour un maximum de sécurité en cas de pluie ; « Miroir », pour procurer un effet réfléchissant extraordinaire ; « Soie », pour une carrosserie lisse au toucher. MODE D'EMPLOI ET DILUTIONS : Introduire le produit pur dans l'arc au moyen d'une pompe de dosage avec aspiration de 40-60 ml par voiture, en fonction du niveau de brillance souhaité.

Détergent alcalin concentré très moussant et très aromatisé parfum Hugo boss pour nettoyage haute pression, élimine facilement tout type de saleté, peut être utilisé pour tout type d'eau

Anwendungsbereich: Karosseriebau, Formenbau, Schreinerarbeiten, Möbelbau und Malerhandwerk Produkteigenschaften: 2K-Füllspachtel auf Polyesterbasis zum Ausfüllen großer Vertiefungen und Unebenheiten. Kann auch in dicken Schichten an senkrechten Flächen aufgespachtelt werden. Sehr gut geeignet für Spenglerarbeiten, Karosseriebau und Formenherstellung. Auch für Verklebung für Marmor und Kunststein mit Stahl und zur Ausbesserung von Schäden an Holzstellen (innen) und Spanplatten (innen) einsetzbar. Bindemittelbasis: Ungesättigte Polyesterharze Glanzgrad: -- Trocknung: (23 ° C 60 % rel. Luftfeuchtigkeit) überlackierbar nach 15 - 20 Minuten Ergiebigkeit/Verbrauch: -- Auftragsart: -- Farbton: Stammmaterial: Grau - Härter: Rot Verwendung: außen , innen